Mark, I forgot to attach the picture of a pattern that works well. You do need to rune the gunwales all the way aft and forward to the end of the wing. Cut it so that it goes to about 1/4" up from the bottom of the gunwale (very important) and on to the top wing surface about 1". When you put it on, stick it to the top surface first and let it curl upward as you follow the curve of the tank. Then have someone (two other are best) help you carefully flop it down starting in the middle and working toward both ends. It will want to flop all at once and that is why you need a couple of people to keep it from flopping with bubbles under it. The toe rails should have non skid to about 1/4' about the deck and all the way to the bevels on the ends. Bram
This is the Swift Solo mailing list. For unsubscribe instructions, visit here: http://catzooks.com/swift-solo/ |
