Dave,
Start all pieces from the top of the blade (1/2" from the top). Yes there
is less material at the tip of the blade.
Mark
----- Original Message -----
From: "Dave Lindsey" <lindsey@xxxxxxxxxxx>
To: <swiftsolo@xxxxxxxxxxxx>
Sent: Monday, February 20, 2006 1:24 AM
Subject: Clarify CB lay-up
> When building the CB. The PDF says Roll 1 is 16 inches short. Does this
mean
> short from then the bottom of the blade? I must assume so. Roll 2 and 3
are
> 1 inch short. Roll 4 is 10 inches short , etc.
>
> Is this simply a tapering of the layers?
>
> Has anyone added an uni. to their lay-up.
>
> Dave Lindsey
> CAN 046
>
>
> This is the Swift Solo mailing list. For unsubscribe instructions,
> visit here: http://catzooks.com/swift-solo/
>
>
This is the Swift Solo mailing list. For unsubscribe instructions,
visit here: http://catzooks.com/swift-solo/
|