and make sure there is a securing screw in the protector
----- Original Message -----
From: BDally6107@xxxxxxx
To: Christian@xxxxxxxxxxxxx ; swiftsolo@xxxxxxxxxxxx
Sent: Tuesday, June 13, 2006 12:42 PM
Subject: Re: Batten information
Christian,
Thanks for posting that info. Do remember that you'll need the adjusters as
well when you are ordering. The battens should be easy to cut to length as
long as you remember to adjust the adjustment screw most of the way out before
installing it in the pocket to determine how much to cut off. Also, make sure
that the inward end goes all the way into the end protectors.
Bram
|