Re: boom rigging question

[BDally6107@xxxxxxx]

Darius,
24" is the answer to both questions.  From the front of the boom to  the hole 
for the vang is 24" and that is also the measurement to the very front  of 
the Fredriksen pivot mount.  The pin hole should be up about 1 1/4" from  the 
bottom of the boom.
 
It's great to see that you're getting close Darius.  Let me know if  you need 
anything.
 
Best regards,
 
Bram



************************************** See what's free at http://www.aol.com.