img_2588 (1/15)
Trimming the trailing edge of the hull. I trimmed it about 1/8" long - I did this by measuring the underside of the strip at the centreline, chine and edge. I then transferred the measurement to the visible side, less 1/4". One chine measurement was a bit too long, so I cut off too much - so I sanded everything down to 1/8".
Aug 03, 2004 - 20:37
![[Next >]](/static-catz/tsign_next.png){kind=small}
![[Last >>]](/static-catz/tsign_last.png){kind=small}