Canon PowerShot G3 | 1/60 | f/2.2 | (flash) | 10.2mm

img_9466 (6/22)

Next up: fill the holes with epoxy so it soaks in. I put tape on either side, then filled a syringe and squirted it in the hole from either side. Wait about ten minutes, continuing to fill the holes as any air pockets form. Once ten minutes is up, pull the tape off, push a bolt through to remove the excess epoxy, wipe clean, and walk away.

Apr 05, 2007 - 21:57

[<< First] [< Previous] Index page [Next >] [Last >>]