img_9577 (2/29)

There we go. The distance from the far edge of the table to the outline of the cassette is carefully measured (twice, thrice) to ensure that it matches the correct angle of the tiller. I then flip the tiller and rudder box over, place on top of the table, align the box with the outline, and line the tiller up on the long line, and the tiller should just be touching the table - and everything is aligned correctly and ready to bond. Just be sure that the tiller is at the right angle to clear *both* toe rails; mine differed by about 1/8”, but boy would it suck to not measure both. ;-)

Apr 16, 2007 - 20:29