swift-solo
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: Bulkhead taping

from [BDally6107] [Bookmark Link][Original]
To: DNUS4192@xxxxxxx, swiftsolo@xxxxxxxxxxxx
Subject: Re: Bulkhead taping
From: BDally6107@xxxxxxx
Date: Tue, 6 Apr 2004 09:57:41 EDT 
Good question Randy,

As you can see I've done it both ways but decided that the piece across the 
top was unnecessary because it is not aligned with the loading in that area.  
This is not an item that is considered during measurement so if you've already 
put it on it will be fine.

Regards,

Bram
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: Bulkhead taping, DNUS4192
Next by Date:  RE: Class update, Rob DesMarais, D.C.
Previous by Thread:  Re: Bulkhead taping, DNUS4192
Next by Thread:  Incorporation Help Please, Greg Ryan
Indexes:  [Date] [Thread] [Top] [All Lists]
This is the Swift Solo mailing list archive. Visit here to see instructions on how to subscribe and unsubscribe from the list, and to browse the mailing list archives.