Re: backing for 6/32

[Christian Rasmussen <Christian@xxxxxxxxxxxxx>]

6/32 = 3/16

Christian


Warren Stevens wrote:

> Hi all - a couple questions for you.
>
> 1) for through-bolts which need backing blocks and which are 6/32,
> what are you using for the nut on the inside of the hull?  I can't
> find 6/32 tee-nuts... any hints?  I'm thinking of the block in the
> centre of the deck 4" from the transom, and the double blocks the
> trapeze shockcord goes through mounted immediately in front of the
> transom bar.
>
> 2) For things which are just screwed into the deck (no backing block),
> what length screw are you using?  I can't seem to find 1/4" or 3/8"
> stainless wood screws, and it doesn't seem right to put a backing
> block on for these.  Here, I'm thinking of the fairleads for the
> trapeze shockcords just outside the toe rail, and the inspection
> ports.
>
> Also - whoever suggested using a soldering iron to remove bonded in
> bolts - thanks.  You saved my bacon. ;-)
>
> Warren
>
> This is the Swift Solo mailing list.  For unsubscribe instructions,
> visit here: http://catzooks.com/swift-solo/
>
>

smime.p7s
Description: S/MIME Cryptographic Signature