swift-solo
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: Grinding chainplate bolts

from [BDally6107] [Bookmark Link][Original]
To: warren@xxxxxxxxxxxx, swiftsolo@xxxxxxxxxxxx
Subject: Re: Grinding chainplate bolts
From: BDally6107@xxxxxxx
Date: Sun, 4 Nov 2007 12:23:04 EST 
Warren,
use your Dremel with an abrasive disc.  I recommend  this tool  for cutting 
off all bolts.  It is far easier than a hack saw--even when you  do have room 
to operate.  Do cut a little--move to a different bolt--come  back after it 
cools a bit--repeat till you get through it.  Wouldn't want  you to catch your 
Swift on fire!
 
Bram



************************************** See what's new at http://www.aol.com
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Grinding chainplate bolts, Warren Stevens
Next by Date:  Re: Grinding chainplate bolts, Mark White
Previous by Thread:  Re: Grinding chainplate bolts, Mark White
Indexes:  [Date] [Thread] [Top] [All Lists]
This is the Swift Solo mailing list archive. Visit here to see instructions on how to subscribe and unsubscribe from the list, and to browse the mailing list archives.