evening Greg :)
just to let you know....we are also interesting in launcher throat.
await prices for both blanks & finished unit :)
cheers,
Tom.
-----Original Message-----
From: Greg Ryan [mailto:gregoryrryan@xxxxxxxxxxx]
Sent: 27 February 2004 16:21
To: Greg Ryan
Cc: swiftsolo@xxxxxxxxxxxx
Subject: Re: Luancher throats
Working out a price for skinned throats as we speak. You will have to
glass onto, and fair them into your gunwales as each boat will vary
slightly, tap your jib block anchoring placements as Bram describes,
optionally, you can complete a thin filler coat or gelcoat (maybe colored)
on the surface to prevent any possible weave print-through and finally you
can polyester coat them when you varnish the boat to protect the epoxy from
UV of you dont use gelcoat. They will be vac bagged epoxy
carbon/carbon/Kevlar hybrid (biased) with a protective cover of a fine tight
weave E-glass. Each throat will have an integral land for the correct
angled placement of the jib cheek blocks. They will be light and very strong
and durable. I Will keep the price just above my cost. I Will also donate
any/all profit to the non-profit NYC Skiff League to promote the sport of
skiff sailing in the NE.
If you prefer to complete the bending and skinning yourself please let me
know how many blanks you will need and when you need them.
Precisely cut (CNC) Blanks, unskinned with matching upper and lower saddle
will be $15. Lead time will be around 7 business days or less.
I'll get back to you about the cost of the finished items later this week.
Greg
Swift Solo -- Rose
----- Original Message -----
From: rowr
To: gregoryrryan@xxxxxxxxxxx
Sent: Thursday, February 26, 2004 12:58 PM
Subject: Luancher throats
Morning Greg
I was wondering how much the cut foam blanks are, and the completed
launcher throat. Also, can you ship to Canada?
regards
Roger Wright
|