Morning Bram,
thanks for your reply :)
re stn 8 & half bulkheads - did you add any carbon tape to bulkhead at
station 8 or to any of the half bulkheads?
everything else clear - thanks.
regards,
Tom.
USA020.
-----Original Message-----
From: BDally6107@xxxxxxx [mailto:BDally6107@xxxxxxx]
Sent: 04 April 2004 17:58
To: tom.owen@xxxxxxx
Cc: swiftsolo@xxxxxxxxxxxx
Subject: Re: Tom questions :)
Tom
Good to hear from you.
Put carbon tape on one side of station 6 only.
Cut station 8 by measuring the width of your cb trunk and cutting 1/2 of
that width out of each side from the centerline.
The inner corners of the transom bar line up with the inner corners of the
steps (see the picture on the cover).
If I've done a poor job of explaining, let me know and I'll try again.
Best regards,
Bram
|