Craddle:
Are there cradle plans as mentioned in the manual? Pg. 60.
What stations would the wood on the cradle lie? Distance between
the wood running parallel with the stations?
e-glass or s-glass or hybrid? Does the Sweet package order
contain enough for the cradle?
Injecting staple holes? Is the West System Syringes of small enough
diameter to fill these or do I have to get hypodermic needles?
Center Board Trunk - Mast Step? Any new plans? Any refiguring to fit
between bulkheads 6 & 8 instead of cutting one of them? Wouldn't you lose
some strength?
Seal coating: Are you doing it with a squeegee, roller or brush?
Beveling the hull at transom - 45 degrees? Any tips or tools used?
Do you use the metal roller for smoothing out the glass as shown in the
Kayak book?
Graphite Powder: Not included in the kit from Sweet so how much do we need
to purchase? When you say 10% graphite powder, what you referring to? 10%
in relation to the weight of epoxy used?
Rob
|