Bram,
Seems like a problem spot. Did you find my question about the cb and rudder
lay up?
Mark
----- Original Message -----
From: BDally6107@xxxxxxx
To: Mark@xxxxxxxxxxxxxxxxxxxxxx ; swiftsolo@xxxxxxxxxxxx
Sent: Wednesday, December 21, 2005 1:24 PM
Subject: Re: cb trunk
Mark
Just run the tape flush with the top of the deck and the bottom of the hull
and don't radius the opening. Your insert blocks need to transfer 100% of the
load from the blade to the hull skin and the deck skin (not the sides of the
trunk). A radius will only leave less area to take the load and may transfer
part of it to the trunk sides (will cause a leak).
Best regards,
Bram
|