To: | "Daniel McGill" <dan@xxxxxxxxxxxxx>, swiftsolo@xxxxxxxxxxxx |
---|---|
Subject: | Re: A reserved seat at the table |
From: | "Robert Harper" <rharper@xxxxxxxxxxxx> |
Date: | Wed, 17 Jan 2007 11:07:51 -0700 |
In-reply-to: | <FE56657C42C65F4497E255D5306730C11CC1DB@SDI01.SDIRELAND.COM> |
References: | <FE56657C42C65F4497E255D5306730C11CC1DB@SDI01.SDIRELAND.COM> |
There wasn't a change to any of the stations so you can start on your
strongback now. The change was to the profile of the bow and there is a
template to be made for that. You are a long way from needing that but I'm
sure Bram will be happy to send you the template drawing when you are
ready. I gave my extra strips to someone so he could build a kayak for his GF and then get on with a Swift. It will cost a lot to ship the strips around the country. There might be some in your area. You should be able to go to a local lumber mill and have them get some rough lumer if you plan on milling your own strips or you can buy them from some of the listed suppliers if you don't get enough from other builders. Welcome back and keep us posted on your progress. On Wed, 17 Jan 2007 10:56:40 -0700, Daniel McGill <dan@xxxxxxxxxxxxx> wrote: Hello all -- Live large, love lots, and sail fast! The mark of who you are is determined by what you do when you don't have to do it. USA 050 Fugu 77959 Wasabi Robert Harper This is the Swift Solo mailing list. For unsubscribe instructions, visit here: http://catzooks.com/swift-solo/ |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | A reserved seat at the table, Daniel McGill |
---|---|
Next by Date: | Re: A reserved seat at the table, Mark White |
Previous by Thread: | A reserved seat at the table, Daniel McGill |
Next by Thread: | Re: A reserved seat at the table, Mark White |
Indexes: | [Date] [Thread] [Top] [All Lists] |