Hey Tom, Is that you daggerboard? on the right. I made one for an F28R out
of cedars strips and just filled the gaps,steps,and then glassedit. I took the
profile from a NACA 0061 and it was bitchin. and tough. Keep up the good
work . Pepe ----- Original Message -----
From: tom owen
To: BDally6107@xxxxxxx ; swiftsolo@xxxxxxxxxxxx
Sent: Tuesday, March 09, 2004 7:27 PM
Subject: RE: parts update
Bram,
thanks for the update on parts.
I presume that Fisheries have the up-to-date list & will just ship
back-ordered parts as they arrive.
weird to not get a packing list from them as I have found it difficult to
work out what is backordered.
1. what do the sta-master adjusters look like? I did not get t-ball fitting
and backing plates for lowers.
2. excellent re mainsheet
3. not sure what these toggle adjusters are - I do have 2 threaded forks
also I am still awaiting:
jib track
Fredriksen pin sheet ratchet x1
should I contact Chris at Fisheries directly to sort?
regards,
Tom.
USA020
PS. photo attached to show that we are actually doing something!! cradle
glass on Sunday afternoon :)
-----Original Message-----
From: BDally6107@xxxxxxx [mailto:BDally6107@xxxxxxx]
Sent: 09 March 2004 00:59
To: swiftsolo@xxxxxxxxxxxx
Subject: parts update
Hello everyone,
It's great to see the progress on all these boats.
First, let me get into the parts issues. The last two back ordered parts
orders are going out tomorrow. They will be missing the shroud levers which
will be sent as soon as they arrive.
A while back I post some changes to the list that should be noted again and
hopefully I'll get the list corrected on the website soon.
Here are the changes.
1. The four calibrated turnbuckles have been reduced to three and two
sta-master adjusters have been added for the caps. The three turnbuckles are
for the lowers and the forestay. The triple blocks and the single blocks for
adjustable lowers have been eliminated as you now have calibrated turnbuckles.
You also should have some t-ball fitting and backing plates for the lowers.
2. The mainsheet has been changed to Maffioli Swiftcord--simply much
better.
3. you should have three toggle style threaded adjusters to go with your
three calibrated turnbuckles.
4. It seems like I'm forgetting something but I'll have to look to find
the old email.
Some of your parts orders went out without tiller extension, some without
jib tracks and now a couple will go out without shroud levers. I am aware of
these items and they will be shipped to you if they haven't already. If your
are missing parts other than these, Call Fisheries Supply and talk to Chris
Kennedy 1-206-632-4462. You'll find Chris very helpful.
Thanks for your patience on these orders. As I mentioned before, we caught
Ronstan and Fisheries a bit off guard and I requested that they ship the orders
whenever they had the majority of the items in order to keep you from being
held up.
Best regards,
Bram
------------------------------------------------------------------------------
This is the Swift Solo mailing list. For unsubscribe instructions,
visit here: http://catzooks.com/swift-solo/
|