Christian,
Should I consider moving the cam blocks aft then to clear the shrouds?
Mark
----- Original Message -----
From: "Christian Rasmussen" <Christian@xxxxxxxxxxxxx>
To: "Mark White" <Mark@xxxxxxxxxxxxxxxxxxxxxx>
Cc: <swiftsolo@xxxxxxxxxxxx>
Sent: Wednesday, October 26, 2005 2:21 PM
Subject: Re: toe rails
> Hi Mark,
>
> Just move it so it fits. Remember they should point toward the cleat
> base on the deck, and the forward one toward
> the mast. On mine the shroud is also in the way. If I ever redo that
> part I will probably try to come up with a system
> where the cleats are closer to edge of the boat and aft of the shrouds.
> (They are then easier to reach when you are on the wire)
> I would then have to either make the toe rail shorter or find some
> innovative way of running the line to where it needs to go.
>
> Christian
>
>
> Mark White wrote:
>
> > Bram and all,
> >
> > There seems to be a conflict with the toe rails and the cam blocks.
> > Following the deck plan, the aft cam block sits 1/2" aft of station
> > 8, the toe rail is suppose to go foreward of station 8 by 1/2". Also
> > the aft cam block positioned 1/2" outside of the step will block the
> > shock cord as it exits the front of the toe rail. What adjustments
> > should be made to correct this?
> >
> > Sincerely,
> >
> > Mark
> >
> > ------------------------------------------------------------------------
> > [picture deleted]
> >
> >------------------------------------------------------------------------
> >
> >This is the Swift Solo mailing list. For unsubscribe instructions,
> >visit here: http://catzooks.com/swift-solo/
> >
>
>
Sincerely,
Mark
|