It is great isn?t it!!!!!!!!! In retrospect I would tape the flair after
doing the middle of the hull.
The question is which Aussie is going to launch the first Swift
The Aussie in New York or.....................
The Aussie in Brisbane
-----Original Message-----
From: Greg Ryan [mailto:gregoryrryan@xxxxxxxxxxx]
Sent: Tuesday, 3 January 2006 1:55 PM
To: Steve Nichols; Swiftsolo
Subject: Re: Fairing nearly complete - a couple of questions
I see you have discovered the really good yellow tape NOT.
----- Original Message -----
From: Steve Nichols <mailto:steve@xxxxxxxxxxxxxx>
To: Swiftsolo <mailto:swiftsolo@xxxxxxxxxxxx>
Sent: Monday, January 02, 2006 8:52 PM
Subject: Fairing nearly complete - a couple of questions
I have nearly finished fairing the hull before putting on the flare. I
enclose a picture. It is really rewarding to see the strips change into a
nice smooth hull shape. The only problem I have had is it is Mid Summer over
here and frequently the temp in the garage has been 36 to 38 degrees (mid
high nineties) and it is hard to keep sweat off the cedar.
My questions in regard to the filling process are
1) Is it best to fill the larger gaps first before the first overall fill
with the epoxy?
2) Have people bothered making the fill for the gaps wood coloured for
practice or just gone with the fairing compound as this part of the hull
will be painted?
3) I have the hull fixed to the assembly in a few areas with screws. When
doing the fill coats have people left out these areas and done them just
prior to glassing? I am concerned that I could inadvertantly bond the screws
to the cedar which could lead to hassles getting them out.
By the way the string I used under the staples to help remove them was a
great timesaver. I simply pulled on end of the string and out they popped.
It was a good idea to wear eye protection whilst doing this. One good tug
could remove 10 ?15 staples at a time. Those that didn?t come fully out
could easily get pulled by pliers as they were raised up.
Cheers,
Steve
PLEASE NOTE * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
This message and any attachments may contain privileged and confidential
information intended only for the use of the addressee/s. Any unauthorised
use of this material is prohibited. If you have received this message in
error, please notify the sender immediately, delete the message and destroy
any printed or electronic copies.
Opinions expressed in this E-Mail are those of the sender and do not
necessarily represent the views of Allsafe Insurance Brokers Pty Ltd.
Allsafe Insurance Brokers Pty Ltd does not accept any responsibility for the
loss or damage that may result from reliance on, or the use of, the
information contained in this E-Mail and attachments.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
_____
This is the Swift Solo mailing list. For unsubscribe instructions,
visit here: http://catzooks.com/swift-solo/
PLEASE NOTE * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
This message and any attachments may contain privileged and confidential
information intended only for the use of the addressee/s. Any unauthorised use
of this material is prohibited. If you have received this message in error,
please notify the sender immediately, delete the message and destroy any
printed or electronic copies.
Opinions expressed in this E-Mail are those of the sender and do not
necessarily represent the views of Allsafe Insurance Brokers Pty Ltd.
Allsafe Insurance Brokers Pty Ltd does not accept any responsibility for the
loss or damage that may result from reliance on, or the use of, the information
contained in this E-Mail and attachments.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|