Removing Peel Ply from Blades

swift-solo

Removing Peel Ply from Blades

To:	<swiftsolo@xxxxxxxxxxxx>
Subject:	Removing Peel Ply from Blades
From:	"Rob DesMarais, D.C." <drrld@xxxxxxxxxxx>
Date:	Sat, 25 Mar 2006 09:43:02 -0600
Importance:	Normal
In-reply-to:	<9e.37ec0178.314a11c1@aol.com>

Any tricks to getting this stuff off?  I have one edge of the stuff clamped
to a bench with a couple of other c-clamps on the other side and pulling
like hell and it barely budges.  There is no chance of breaking the blade,
right?

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
Re: Portsmouth number, BDally6107 Re: Portsmouth number, BDally6107 Removing Peel Ply from Blades, Rob DesMarais, D.C. <= RE: Removing Peel Ply from Blades, Rob DesMarais, D.C. Re: Removing Peel Ply from Blades, Mark White

Previous by Date:	Re: 2006 Membership and Regatta Registration., Greg Ryan
Next by Date:	RE: Removing Peel Ply from Blades, Rob DesMarais, D.C.
Previous by Thread:	Re: Portsmouth number, BDally6107
Next by Thread:	RE: Removing Peel Ply from Blades, Rob DesMarais, D.C.
Indexes:	[Date] [Thread] [Top] [All Lists]

This is the Swift Solo mailing list archive. Visit here to see instructions on how to subscribe and unsubscribe from the list, and to browse the mailing list archives.