To: | "Rob DesMarais, D.C." <drrld@xxxxxxxxxxx>,<swiftsolo@xxxxxxxxxxxx> |
---|---|
Subject: | Re: Removing Peel Ply from Blades |
From: | "Mark White" <mwhite@xxxxxxxxxxxxx> |
Date: | Sun, 26 Mar 2006 07:30:50 -0700 |
References: | <000001c65022$d13b9190$0201a8c0@OFFICE> |
Rob, I took a pair of tin snips and made an inch or so cut every 6" then grabbed it with a pair of pliers and removed it in 6" strips around the blade. Mark ----- Original Message ----- From: Rob DesMarais, D.C. To: swiftsolo@xxxxxxxxxxxx Sent: Saturday, March 25, 2006 8:43 AM Subject: Removing Peel Ply from Blades Any tricks to getting this stuff off? I have one edge of the stuff clamped to a bench with a couple of other c-clamps on the other side and pulling like hell and it barely budges. There is no chance of breaking the blade, right? |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | RE: Removing Peel Ply from Blades, Rob DesMarais, D.C. |
---|---|
Next by Date: | The new sails are in, BDally6107 |
Previous by Thread: | RE: Removing Peel Ply from Blades, Rob DesMarais, D.C. |
Next by Thread: | The new sails are in, BDally6107 |
Indexes: | [Date] [Thread] [Top] [All Lists] |