Dave,
You might consider using the thru-bolt for the trapeze tangs to attach the
spreader collar. The trapeze attachment should be as high as possible, so it
may be inline with the lower part of your spreader collar anyway. I wish that
had occurred to me before finishing mine. See below.
Bill Scheumann
USA020 and USA040
n a message dated 10/4/2006 8:43:34 PM Eastern Daylight Time,
lindsey@xxxxxxxxxxx writes:
> When attaching the spreaders to the mast, I'm considering something
> Ian MacPhail suggested as a method; add carbon tape and epoxy over the
> collar above and below the spreader. Overlapping onto the mast.
>
> I seems like a reasonable suggestion. This would allow the spreaders and
> collar to be removed if necessary for some reason. It also reduces intrusive
> holes or rivets. Does anyone have an opinion here?
>
> My only concern would be the shear between the to pieces of tape when the
> mast flexes. It wouldn't be that much. Or would it?
>
> Dave Lindsey
> CAN 046
>
This is the Swift Solo mailing list. For unsubscribe instructions,
visit here: http://catzooks.com/swift-solo/
|