Yes -- I'm thinking of the strips below the bow piece (between the bow
piece and the waterline). My bow piece is about 10" high, and the
strips are maybe 15" (I'm not in front of the boat at the moment). So
the additional 5" of strips need some re-fitting before I cut off the
remainder and attach the bow piece.
I didn't shape the bow when I stripped the hull or flares, and so my
bow is a bit too long.
Warren
On Mon, Jun 28, 2004 at 10:17:47AM -0400, Christian Rasmussen wrote:
> Hi Warren,
>
> You are suppose to cut it off, and attach the bow piece. So you
> interlocking of strips will stop where the bow piece starts. Hence
> it will not interlock all the way up to the deck. The boat will end
> up with a flat triangular peice in front. (foremost part of the bow
> peice) Hope that helps. I can take some pictures of mine, but I
> already have the black trim on it, so you wont see the transition
> from strips to bow peice.
>
> Christian
--
warren stevens - catzooks.com
This is the Swift Solo mailing list. For unsubscribe instructions,
visit here: http://catzooks.com/swift-solo/
|