Re: Pro-Set Bonding

["Greg Ryan" <gregoryrryan@xxxxxxxxxxx>]

Check with Pepe I think he might have the gun.
I'd Like to use it after you.
Greg
----- Original Message ----- 
From: "rowr" <rowr@xxxxxxxxx>
To: <WFS03@xxxxxxx>
Cc: <swiftsolo@xxxxxxxxxxxx>
Sent: Thursday, June 16, 2005 3:16 PM
Subject: Re: Pro-Set Bonding


> Bill, I used 175/275. It comes as a two part kit. You do need to get the 
> gun to apply it though. It is a special gun that applies both 175 and 275 
> together through a mixing nozzle. You will use about three sets of pro-set 
> to bond deck to hull.
>
> regards
> Roger
>
> ----- Original Message ----- 
> From: <WFS03@xxxxxxx>
> To: <BDally6107@xxxxxxx>
> Cc: <swiftsolo@xxxxxxxxxxxx>
> Sent: Thursday, June 16, 2005 9:53 AM
> Subject: Pro-Set Bonding
>
>
> > Bram,
> > I am considering the use of Gougeon Bros. "Pro-Set" in the bonding of the
> > hull and deck for USA020.  What is the suggested hardener and resin, and 
> > what
> > quantity of each will be needed to complete the job?  I have seen 
> > reference to
> > a 175/275 resin/hardener in the archives but no quantity.
> >
> > Bill Scheumann
> > USA020 and USA040
>
>
> This is the Swift Solo mailing list.  For unsubscribe instructions,
> visit here: http://catzooks.com/swift-solo/

This is the Swift Solo mailing list.  For unsubscribe instructions,
visit here: http://catzooks.com/swift-solo/