swift-solo
[Top] [All Lists]

Re: Pro-Set Bonding

To: BDally6107@xxxxxxx
Subject: Re: Pro-Set Bonding
From: WFS03@xxxxxxx
Date: Thu, 16 Jun 2005 17:31:12 EDT
Cc: swiftsolo@xxxxxxxxxxxx
Bram,
The Pro-Set Technical Data Sheet states that the coverage for 175/275 yields 
as follows:

3/8 inch dia bead      30 linear feet
1/2 inch dia bead      25 linear feet

I figure 20 ft of flanges to bond plus two feet of additional area.  Roger 
wrote that he used three 175/275 sets to bond the deck and hull.  I can obtain 
the Pro-Set locally from Composites One for $20 US to use with the manual gun 
for $77 US.  The air-gun is $212 US.  I'll get three sets and any left-over can 
go into USA040.

Bill Scheumann
USA020 and USA040
<Prev in Thread] Current Thread [Next in Thread>

This is the Swift Solo mailing list archive. Visit here to see instructions on how to subscribe and unsubscribe from the list, and to browse the mailing list archives.