swift-solo
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: Bulkhead 8 and CB Trunk alignment

from [Robert Harper] [Bookmark Link][Original]
To: swiftsolo@xxxxxxxxxxxx
Subject: Re: Bulkhead 8 and CB Trunk alignment
From: "Robert Harper" <rharper@xxxxxxxxxxxx>
Date: Tue, 06 Dec 2005 09:02:48 -0700
In-reply-to: <021001c5fa7c$49528280$0201a8c0@OFFICE>
References: <021001c5fa7c$49528280$0201a8c0@OFFICE>
One lesson I have learned building boats.
One can never have too many clamps. I seem to buy another dozen with every boat I build. Some get buggerd up one way or another but I end up with a net increase with every boat.

On Tue, 06 Dec 2005 08:46:48 -0700, Rob DesMarais, D.C. <drrld@xxxxxxxxxxx> wrote:

Thanks Mark - I definitely need many many more clamps.

To your health,
            Rob

--

Don't be good. Have LOTS of fun.
Live large, love life, and sail fast.
Robert Harper USA 050 "Fugu"


This is the Swift Solo mailing list.  For unsubscribe instructions,
visit here: http://catzooks.com/swift-solo/

[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  RE: Bulkhead 8 and CB Trunk alignment, Rob DesMarais, D.C.
Next by Date:  Re: Bulkhead 8 and CB Trunk alignment, BDally6107
Previous by Thread:  RE: Bulkhead 8 and CB Trunk alignment, Rob DesMarais, D.C.
Next by Thread:  RE: Bulkhead 8 and CB Trunk alignment, Rob DesMarais, D.C.
Indexes:  [Date] [Thread] [Top] [All Lists]
This is the Swift Solo mailing list archive. Visit here to see instructions on how to subscribe and unsubscribe from the list, and to browse the mailing list archives.