Bulkhead 8 and CB Trunk alignment

swift-solo

Bulkhead 8 and CB Trunk alignment

To:	<swiftsolo@xxxxxxxxxxxx>
Subject:	Bulkhead 8 and CB Trunk alignment
From:	"Rob DesMarais, D.C." <drrld@xxxxxxxxxxx>
Date:	Sun, 4 Dec 2005 09:44:07 -0600
Importance:	Normal
In-reply-to:	<13dd01c5f6c7$96e93d80$0200a8c0@markkrtsykx0qx>

I have a ¼? difference with CB trunk and Bulkhead 8 lining up.  The bulkhead
is higher.  6 lined up nice and flush.  I don?t know whether to cut down 8
or raise the trunks aft end?

 

Yes, I did cut down # 8 as Bram indicated.

 

Rob

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
Chainplate alignment measurements, Rob DesMarais, D.C. Re: Chainplate alignment measurements, Mark White Bulkhead 8 and CB Trunk alignment, Rob DesMarais, D.C. <= Re: Bulkhead 8 and CB Trunk alignment, ROWR Re: Bulkhead 8 and CB Trunk alignment, Mark White RE: Bulkhead 8 and CB Trunk alignment, Rob DesMarais, D.C. Re: Bulkhead 8 and CB Trunk alignment, Robert Harper RE: Bulkhead 8 and CB Trunk alignment, Rob DesMarais, D.C. RE: Bulkhead 8 and CB Trunk alignment, rowr Launcher Throat Modification, Rob DesMarais, D.C.

Previous by Date:	Re: what to do with used strongbacks?, WFS03
Next by Date:	Re: Bulkhead 8 and CB Trunk alignment, BDally6107
Previous by Thread:	Re: Chainplate alignment measurements, Mark White
Next by Thread:	Re: Bulkhead 8 and CB Trunk alignment, ROWR
Indexes:	[Date] [Thread] [Top] [All Lists]

This is the Swift Solo mailing list archive. Visit here to see instructions on how to subscribe and unsubscribe from the list, and to browse the mailing list archives.