To: | rharper@xxxxxxxxxxxx, Christian@xxxxxxxxxxxxx, swiftsolo@xxxxxxxxxxxx |
---|---|
Subject: | Re: plastic staples... Not so happy.. |
From: | DARDIRMY@xxxxxxx |
Date: | Mon, 6 Feb 2006 14:46:22 EST |
I used a high quality Japanese Pull Saw to cut the staples from the frame. It was quite quick and the blade is very flexible with a long handle. You can bend the blade to 90 degrees, so when you cut there is no knuckle bashing. But I also wore thin mechanics gloves and managed to get away without a scratch. Darius |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: plastic staples... Not so happy.., DARDIRMY |
---|---|
Next by Date: | 3M Clear non skid (Medium #220)?, Ed Harrison |
Previous by Thread: | Re: plastic staples... Not so happy.., DARDIRMY |
Next by Thread: | Re: plastic staples... Not so happy.., WFS03 |
Indexes: | [Date] [Thread] [Top] [All Lists] |