Steve,
I think you can also locate station 0 by measuring from the transom 13' 11 1/2
" and subtract 1/4" for the transom inset or 13' 11 1/4", if I did the math
right. Greg is right, put a permanent mark there that won't be sanded off, it
gets old remeasuring to find that silly spot.
Mark
----- Original Message -----
From: Steve Nichols
To: Swiftsolo
Sent: Saturday, July 15, 2006 12:05 AM
Subject: Location of station 0
Hi Guys,
I'm starting to think about locating hardware on the deck and have noticed
that everything is referenced to station 0. Obviously it is 12" in front of
station 1. Is it from the front face of station 1? Apologies if this is
somewhere around but I haven't been able to locate any reference to it.
Cheers
Steve
------------------------------------------------------------------------------
On Yahoo!7
Messenger: Make free PC-to-PC calls to your friends overseas.
|