Bram,
I envisioned something like the picture below, with the purchase over the
nylon sheave and down into the cleat-V. Christian replied that he is using a
setup like this and will email me a picture. I was wondering if you had tried
this setup and had success or not. The 20-series blocks will handle line up to
1/4", so my concern is whether the cleat will handle the load.
Bill Scheumann
In a message dated 9/11/2006 6:43:16 PM Eastern Daylight Time,
BDally6107@xxxxxxx writes:
>
> Bill,
>
> That cleat will not work at all with 1/8" line --as you pointed out. Also,
> it occurs to me that I'm either missing something or the cleat will be
> facing downward--not something that is likely to work.
>
> Bram
>
This is the Swift Solo mailing list. For unsubscribe instructions,
visit here: http://catzooks.com/swift-solo/
|