http://www.apsltd.com/Tree/d3000/e827.asp
Yale makes one called Pobon 12
Christian
----- Original Message -----
From: "Cunningham, Patrick J" <patrick.cunningham@xxxxxxxxx>
Date: Wednesday, May 12, 2004 12:41 pm
Subject: RE: chain plate
>
> Dear All,
> Where do you folks get your 1/8" PBO from ?
>
> regards
> Patrick
>
> -----Original Message-----
> From: Christian Rasmussen [mailto:christian@xxxxxxxxxxxxx]
> Sent: Wednesday, May 12, 2004 12:42 AM
> To: rowr
> Cc: swiftsolo@xxxxxxxxxxxx
> Subject: Re: chain plate
>
>
> *** WARNING ***
>
> This mail has originated outside your organization,
> either from an external partner or the Global Internet.
> Keep this in mind if you answer this message.
>
> Roger,
>
> Thats what I did. I used middle and outers. I dont have a tally on the
> number of screews I used. I am sticking to 10-24 for everything
> except the
> chainplates where I did 1/4. The lenght will vary but I have been
> buying 3"
> and just cutting them off after I bolted them in.
>
> Christian
>
> ----- Original Message -----
> From: rowr <rowr@xxxxxxxxx>
> Date: Tuesday, May 11, 2004 7:32 pm
> Subject: chain plate
>
> > A question about the chainplate. Is it correct that we are using
> > rudder gudgeons as deck attachments for the chainplates and if
> so,
> > I presume we use the centre hole and the two outmost holes for
> > fitment.
> > Secondly, has anyone made a consolidated list of bolts, screws
> and
> > rivets that are used for the deck fittings. I assume also that
> all
> > the bolts, screws and t-nuts are stainless.
> >
> > regards and good building
> > Roger - CAN048
> >
> >
> >
>
>
> This is the Swift Solo mailing list. For unsubscribe instructions,
> visit here: http://catzooks.com/swift-solo/
>
>
> ********************************************************************
> This email and any attachments are confidential to the intended
> recipient and may also be privileged. If you are not the intended
> recipient please delete it from your system and notify the sender.
> You should not copy it or use it for any purpose nor disclose or
> distribute its contents to any other person.
> ********************************************************************
>
> This is the Swift Solo mailing list. For unsubscribe instructions,
> visit here: http://catzooks.com/swift-solo/
>
>
This is the Swift Solo mailing list. For unsubscribe instructions,
visit here: http://catzooks.com/swift-solo/
|