swift-solo
[Top] [All Lists]

Staging the costs of Building a Swift

To: "Randy Wahlfeldt" <randyw@xxxxxxxxxxxxx>,"SwiftSolo" <swiftsolo@xxxxxxxxxxxx>
Subject: Staging the costs of Building a Swift
From: "Greg Ryan" <gregoryrryan@xxxxxxxxxxx>
Date: Wed, 15 Sep 2004 21:45:32 -0400
Cc: <BDally6107@xxxxxxx>,<christian@xxxxxxxxxxxxx>
References: <00a201c49b28$80360ec0$1a8eae80@wahlfeldt>
Reply-to: "Greg Ryan" <gregoryrryan@xxxxxxxxxxx>
Here would be my very rough cost estimates and how it breaks down over time. We 
could work on this sheet to get a better accounting.
You must have at least a 1 car garage. 

      Materials and cost to build Swift Solo hull 
      Construction Stage Item Notes Cost in boat DIY alternate Cost Cost in 
Tools 
      Stage 1 Plans registration dues shipping    595 595   
      Building Phase Framing Sections.  Get the VMG skiffs framing sections pre 
cut via CNC mill this will be the best $350 you will spend on your boat.  
349.95 349.95   
        Must have Tools,          
        Ryobi bench disk and belt sander Orange Borg     100 
        beefy electric stapler Orange Borg     30 
        Cordless Drill/Driver  JNJ tools     42 
        6in RO sander Orange Borg     140 
        Shopvac Rigid Orange Borg     99.97 
        10in Table Saw Orange Borg BTS15 or better     149 
        Table saw router attachment Orange Borg     100 
        Router JNJ tools     46.71 
        Hot Glue Gun Orange Borg     16.93 
        2 sheets MDF (strongbacks, supports) Blue Borg 45 45   
        Glue   26 26   
        Screws Staples   40 40   
        Sandpaper and sundry   100 100   
        Strips         
        Commercial source   1800     
        Own Milled strips NE USA using 5/4 Clear decking   650   
        Router Bits for strips bead and cove stacked    40   
          individual bead and cove    80   
                  
        Epoxy/Glass Part Kit/ JR Sweet Can get away with less of certain things 
1600 1100   
          1X West 105C if used sparingly       
          3X West 205c if used sparingly       
          1X West 207C if used sparingly       
          2X West 206c if used sparingly       
          Reinforcement as per Kit       
          Extra Crabon uni on special   100   
          Fillers alternative to kit       
          Use local supplier  West Marine for       
          Silica Filleting fibers don't get amt recommended   40   
          Buy West 410 for fairing in Bulk package   60   
        Wood filler touchup holes Orange Borg Select 2-3 colors to match   20   
        Scissors   10 10   
        Forestay fitting   110 110   
        Mast step   50 50   
                  
          Building Stage 1 Total 4725.95 3415.95 724.61 
                  
      Stage 2           
      Rigging Phase  Deluxe Hardware kit   1900.84 1900.84   
        Extra Carbon     200   
        Foils  DIY skinned Blanks  600 150   
                  
          Building Rigging Stage 2 Total 2500.84 2250.84 0 
                  
      Stage 3 Spars Commercially rigged  3500     
      Sailing all spars DIY rigging   1600   
        Sundry Rigging   200 200   
        Sails Banks 2593.2 2593.2   
        Clothes trap PFD (you live in the tropics, right?) 300 300   
                  
                  
          Sailing Stage 3 Total 3700 1800 0 
                  
          Total Cost + $300 10926.79 7466.79 724.61 


<Prev in Thread] Current Thread [Next in Thread>

This is the Swift Solo mailing list archive. Visit here to see instructions on how to subscribe and unsubscribe from the list, and to browse the mailing list archives.