swift-solo
[Top] [All Lists]

Fwd: non skid pattern

To: swiftsolo@xxxxxxxxxxxx
Subject: Fwd: non skid pattern
From: BDally6107@xxxxxxx
Date: Thu, 24 Nov 2005 16:15:27 EST
--- Begin Message ---
To: Mark@xxxxxxxxxxxxxxxxxxxxxx, bill@xxxxxxxxxxxxxxxxxx,swiftsolo@xxxxxxxxxxxx
Subject: Re: non skid pattern
From: BDally6107@xxxxxxx
Date: Thu, 24 Nov 2005 16:14:38 EST
Full-name: BDally6107
Mark,
 
I forgot to attach the picture of a pattern that works well.  You do  need to 
rune the gunwales all the way aft and forward to the end of the  wing.  Cut 
it so that it goes to about 1/4" up from the bottom of the  gunwale (very 
important) and on to the top wing surface about 1".  When you  put it on, stick 
it 
to the top surface first and let it curl upward as you  follow the curve of 
the tank.  Then have someone (two other are  best) help you carefully flop it 
down starting in the middle and working  toward both ends.  It will want to 
flop 
all at once and that is why you  need a couple of people to keep it from 
flopping with bubbles under  it.  The toe rails should have non skid to about 
1/4' 
about the deck and  all the way to the bevels on the ends.
 
Bram

JPEG image


--- End Message ---
This is the Swift Solo mailing list.  For unsubscribe instructions,
visit here: http://catzooks.com/swift-solo/
<Prev in Thread] Current Thread [Next in Thread>

This is the Swift Solo mailing list archive. Visit here to see instructions on how to subscribe and unsubscribe from the list, and to browse the mailing list archives.