| To: | matt@xxxxxxxxxxxxxxxxx |
|---|---|
| Subject: | Re: finding cedar |
| From: | WFS03@xxxxxxx |
| Date: | Wed, 19 Dec 2007 16:21:09 EST |
| Cc: | swiftsolo@xxxxxxxxxxxx |
Matt,
The Western Red Cedar Lumber Association lists a local supplier:
Shuman-Owens Supply Company
1080 Shop road
Columbia, SC 29201
US
Tel: 803-765-9740
Fax: 803-771-8978
See if they have WRC Clear 5/4" x 6" or 4", in 14' or 16' lengths, preferably
flat-sawn so that you can cut quarter-sawn strips. That way you will have
roughly vertical grain in your finished strips and the least amount of waste.
184 board feet of 5/4"x6" was purchased for USA020 and I have approximately
1800' of strips left over for the next boat after finishing USA020. Hope that
this helps.
Bill Scheumann
USA020 and USA040
**************************************
See AOL's top rated recipes
(http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004)
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | finding cedar, Matt Broughton |
|---|---|
| Next by Date: | Re: finding cedar, Matt Broughton |
| Previous by Thread: | RE: finding cedar, Warren Stevens |
| Next by Thread: | Re: finding cedar, Matt Broughton |
| Indexes: | [Date] [Thread] [Top] [All Lists] |